Eureka Nail-In Anchor Tru-Fix 5 x 35mm (50 Pack)

1-Step installation anchor for fixings into solid masonry wall. The plug is less resistant to sunlight and climatic changes compared to nylon nail-in anchors. Countersunk head allows for a flush finish. Requires a pre-drilled hole. Use a hammer to install the nail in. For light to medium weight objects. To install: steel, metal or wood objects to solid masonry wall. Not ideal for use in concrete. How to use: Do not disassemble. More suitable in areas not exposed to direct sunlight or humidity. Ideally used for objects with a recessed hole. The pre-drilled hole size in the wall is always the same size as the plug. Ensure the newly drilled hole is deep enough. Make sure that all the dust & debris is cleared from the drilled hole before installing the anchor. Can be removed using a pozi bit screwdriver. Unscrew 1/3 of the nail, then pull nail and plug out with a claw hammer. The longer and thicker the anchor, the more weight can be carried. To install: electrical boxes, shelf brackets, curtain tie back brackets, and multi-plugs. Other uses: Mounting curtain brackets. Hanging light weight picture frames or mirrors with picture hangers. Size: 5 x 35mm. Pack: 50 pieces. Eureka code: 6S10.