Pattex Power Epoxy Syringe 6ml

Pattex Power Epoxy Syringe 6ml. A fast-setting, gap-filling, two-part epoxy adhesive in a syringe that produces rigid bonds with high bond strength. It cures crystal clear, does not yellow over time and does not expand or shrink once cured; the glue line resists water, fuels, grease and dilute acids and alkali, and it suits interior and exterior use. For bonding wood, glass, ceramics and metals; when fully cured the bond can be cut, sanded, planed, painted and drilled. How to use: work between 15°C and 30°C on clean surfaces free of dust and grease, mix equal volumes of resin and hardener thoroughly, apply a thin film to both surfaces, join them immediately and clamp; the assembly can be handled after 10 minutes. Clean spills with acetone before the adhesive cures. Specifications: Type: two-part epoxy; Pack: 6ml syringe; Mixing ratio: 1:1 by volume; Pot life: 5 to 7 minutes; Curing time: 2 hours at 25°C; Final cure: 24 hours; Temperature resistance: -20°C to 120°C; Shear strength: 10 to 13 N/mm² (steel/steel); Shelf life: 3 years unopened. Pattex IDH: 1397681.