Building & Construction (page 2)
Showing 25 to 34 of 34 products
Pattex No More Nails Strong & Easy Construction Adhesive 250g
Courier nationwide or free collectionR 139.00
Price incl. VAT · Code 401500009410WeatherPrufe WeatherBond Enhance 5L
Courier nationwide or free collectionR 550.00
Price incl. VAT · Code WBE002Alcolin Solderlene Cold Solder 15g
Courier nationwide or free collectionR 58.00
Price incl. VAT · Code 600174303421Pattex No More Nails Strong & Easy Construction Adhesive 400g
Courier nationwide or free collectionR 143.00
Price incl. VAT · Code 401500009409WeatherPrufe WeatherBond Enhance 25L
Courier nationwide or free collectionR 1 890.00
Price incl. VAT · Code 6009695625226Genkem Artificial Grass Adhesive 5L
Courier nationwide or free collectionR 851.00
Price incl. VAT · Code 600756000478Flash Harry Hypercrete Cement Waterproofing Admixture 5L
Courier nationwide or free collectionR 452.00
Price incl. VAT · Code 600371100322Flash Harry Hypercrete Cement Waterproofing Admixture 25L
Courier nationwide or free collectionR 1 935.00
Price incl. VAT · Code 9400600025Eureka Mirror Squares 3 x 24 x 24mm (12 Pack)
Courier nationwide or free collectionR 35.50
Price incl. VAT · Code 6002919055410Sika Sikadur AP All Purpose Epoxy Adhesive Paste 250ml
Courier nationwide or free collectionR 165.00
Price incl. VAT · Code 6004709125006Good to know: Building & Construction
Which cement should I use: 42.5 or 32.5?
Higher-strength cement (42.5 class, for example CEM II 42.5N) is generally used for structural concrete such as foundations, slabs and columns. 32.5 class cement is commonly used for brickwork mortar and plaster. Always follow the mix on the bag or your engineer's specification.
How long must concrete cure before I load it?
Concrete keeps gaining strength for weeks. Keep it damp (covered or regularly sprayed) for at least the first 7 days, especially in hot or windy weather. It reaches most of its design strength after about 28 days - check with your engineer before heavy loading.
What is a damp-proof course and where does it go?
A damp-proof course (DPC) is a strip of plastic membrane built into the wall that stops ground moisture rising into the brickwork. It is placed in walls just above the ground and floor level - typically at least 150 mm above finished ground level - and lapped properly at joints. Without it, walls stay damp and paint and plaster fail.
Which bricks or blocks should I use?
Use face bricks or exterior-grade blocks for walls exposed to weather and plaster bricks or blocks where walls will be plastered. Cement blocks are common for boundary walls and outbuildings. Make sure the units you buy meet the relevant SANS standard and the strength your plans specify.
What do the timber treatment classes H2 to H6 mean?
Treated pine in South Africa is graded by hazard class under SANS 1288: H2 for dry indoor use (insects), H3 for outdoor use above the ground, H4 for timber in contact with the ground, H5 for fresh water, and H6 for marine use in sea water. Use at least H4 for fence posts and anything set in soil.
Why do roof trusses have to be designed?
A roof truss carries the weight of the roof covering, wind and sometimes ceilings or solar panels, so the timber sizes, joints and nail plates must be calculated for the span, pitch and roof type. HPM designs and manufactures roof trusses to your plans, so they fit your building and can be signed off with an A19.