Building & Construction (page 8)
Showing 169 to 177 of 177 products
Home Fires 125mm Wall Bracket for Single Wall Pipe Silver Stainless Steel
Courier nationwide or free collectionR 412.00
Price incl. VAT · Code PBCSS125Home Fires 125mm 45 Degree Bend for Single Wall Pipe Black Stainless Steel
Courier nationwide or free collectionR 455.00
Price incl. VAT · Code PBBL12545Home Fires 125mm 90 Degree Bend for Single Wall Pipe Black Stainless Steel
Courier nationwide or free collectionR 900.00
Price incl. VAT · Code PBBL12590Home Fires 125mm 45 Degree Bend for Single Wall Pipe Silver Stainless Steel
Courier nationwide or free collectionR 443.00
Price incl. VAT · Code PBSS12545Home Fires 125/185 Fixed High Wind Cowl for Insulated Pipe Black Stainless Steel
Courier nationwide or free collectionR 1 095.00
Price incl. VAT · Code PHCOWLBL125185Home Fires 125mm Fixed High Wind Cowl for Single Wall Pipe Black Stainless Steel
Courier nationwide or free collectionR 530.00
Price incl. VAT · Code PHCOWLBL125SINGHome Fires 125/185 Fixed High Wind Cowl for Insulated Pipe Silver Stainless Steel
Courier nationwide or free collectionR 995.00
Price incl. VAT · Code PHCOWLSS12518Home Fires 125mm 90 Degree T-Piece with Lid for Single Wall Pipe Black Stainless Steel
Courier nationwide or free collectionR 590.00
Price incl. VAT · Code PTPBL12590Eureka Wall Plug Nylon P6 6 x 30mm (80 Pack)
Courier nationwide or free collectionR 55.00
Price incl. VAT · Code 600291903083Good to know: Building & Construction
Which cement should I use: 42.5 or 32.5?
Higher-strength cement (42.5 class, for example CEM II 42.5N) is generally used for structural concrete such as foundations, slabs and columns. 32.5 class cement is commonly used for brickwork mortar and plaster. Always follow the mix on the bag or your engineer's specification.
How long must concrete cure before I load it?
Concrete keeps gaining strength for weeks. Keep it damp (covered or regularly sprayed) for at least the first 7 days, especially in hot or windy weather. It reaches most of its design strength after about 28 days - check with your engineer before heavy loading.
What is a damp-proof course and where does it go?
A damp-proof course (DPC) is a strip of plastic membrane built into the wall that stops ground moisture rising into the brickwork. It is placed in walls just above the ground and floor level - typically at least 150 mm above finished ground level - and lapped properly at joints. Without it, walls stay damp and paint and plaster fail.
Which bricks or blocks should I use?
Use face bricks or exterior-grade blocks for walls exposed to weather and plaster bricks or blocks where walls will be plastered. Cement blocks are common for boundary walls and outbuildings. Make sure the units you buy meet the relevant SANS standard and the strength your plans specify.
What do the timber treatment classes H2 to H6 mean?
Treated pine in South Africa is graded by hazard class under SANS 1288: H2 for dry indoor use (insects), H3 for outdoor use above the ground, H4 for timber in contact with the ground, H5 for fresh water, and H6 for marine use in sea water. Use at least H4 for fence posts and anything set in soil.
Why do roof trusses have to be designed?
A roof truss carries the weight of the roof covering, wind and sometimes ceilings or solar panels, so the timber sizes, joints and nail plates must be calculated for the span, pitch and roof type. HPM designs and manufactures roof trusses to your plans, so they fit your building and can be signed off with an A19.