Mon-Fri: 7:30am - 5:15pm | Sat: 8:00am - 1:00pm

By HPM Bouhandelaars · Updated · 5 min read · Tools and electrical

In short

  • The risky moment is when the power comes back on: the supply can surge or dip before it settles.
  • Plug-in surge protectors and surge-protected multiplugs help protect the appliances plugged into them.
  • Switching off or unplugging sensitive electronics during an outage is free and works.
  • Rechargeable LED lights and torches cover most lighting needs without any wiring.
  • Anything fitted in or connected to the DB board - surge arresters, inverters, changeover switches - is work for a registered electrician.

Power cuts - planned load-shedding, a fault on the line or a storm - are part of life in South Africa, and so are the stories of a fridge, a TV or a gate motor that did not survive one. Most of that damage is avoidable with a few inexpensive plug-in devices and some simple habits. This guide explains what actually happens when the power goes off and comes back, what you can safely do yourself and where an electrician has to take over.

Why power cuts damage appliances

The power going off rarely hurts anything. The trouble comes when it returns. As a whole area is switched back on at once, the supply voltage can spike above normal for a moment, dip, or flicker on and off a few times before it settles. Electronic equipment - TVs, decoders, routers, computers, chargers and the control boards inside modern fridges, washing machines, gate motors and alarm systems - is sensitive to those spikes. Motors and compressors do not like being restarted the instant after they stop, or running on low voltage.

Lightning is the other source of surges. A strike on or near a power line sends a surge down the supply, and it can also arrive along telephone, aerial and network cables.

Plug-in surge protection

A plug-in surge protector sits between the wall socket and the appliance and diverts voltage spikes away from what is plugged into it. They come in a few forms:

  • Single surge protector plugs and adaptors for one appliance, such as a fridge, a TV or a gate motor's supply.
  • Surge-protected multiplugs, often with overload protection as well, for a group of devices such as a TV, decoder and sound bar or a computer desk.
  • Power-delay or "fridge guard" type devices, which wait a few minutes after the power returns before switching the appliance back on, so that it misses the unstable first moments and the compressor is not restarted too quickly.

What to know before you rely on one:

  • It protects only what is plugged into it.
  • It works through the earth connection, so it must be used in a properly earthed socket.
  • The protective parts wear out as they absorb surges. Many units have an indicator light that shows the protection is still working; replace the unit when the light goes out or after a big surge.
  • A multiplug with a switch or an overload trip is not necessarily surge-protected. Check that the pack says so.
  • No plug-in device can guarantee protection against a direct or very close lightning strike. In a thunderstorm, unplugging is the surest protection.
  • Do not overload multiplugs or plug one into another. Heaters, kettles and other heavy loads belong in a wall socket of their own.

HPM stocks plug-in surge protector plugs and surge-protected multiplugs in the online store.

Protection at the DB board

The next level up is a surge arrester fitted in the distribution board (DB board), which reduces surges coming in on the supply before they reach any circuit in the house. It protects fixed equipment that plug-in devices cannot, such as the geyser, the stove, lights and hard-wired gate and pool equipment. The best protection is layered: an arrester at the DB board and plug-in protectors at sensitive equipment.

This is not a DIY job. Electrical installation work in South Africa must be done or supervised by a registered electrician, who issues a Certificate of Compliance (CoC) for the work. That includes fitting surge arresters, changing breakers, adding circuits and anything else inside the DB board. DIY work on the board is dangerous, and it can void your insurance. Ask your electrician about surge protection the next time work is done on the board, and check with your insurer whether it affects your cover.

Good habits that cost nothing

  • Switch off at the wall or unplug sensitive electronics when the power goes off, and switch them back on a few minutes after it has returned and settled.
  • Leave one light switched on so that you can see when the power is back.
  • Keep fridge and freezer doors closed during an outage. A closed fridge stays cold for hours.
  • Switch off the stove, iron and heaters if the power fails while they are on, so that they do not come back on unattended.
  • If the earth leakage trips when power returns, unplug appliances and switch circuits back on one at a time to find the cause. Call an electrician if it keeps tripping, and never bypass the earth leakage.

Light during an outage

Lighting is the easiest part to solve, without touching the wiring:

  • Rechargeable emergency lights stay plugged in and switch on by themselves when the power fails. Put them in passages, the kitchen and near the DB board.
  • Rechargeable LED bulbs and lanterns work like ordinary lights and carry on from their own battery.
  • Torches and headlamps - keep one where you can find it in the dark, with spare batteries.
  • Solar lights for outside paths, gates and security lighting need no wiring at all.

Candles and paraffin lamps are a fire risk. If you use them, never leave a flame unattended, keep it away from curtains and out of the reach of children, and put it out before you sleep.

Backup power: what to know before you buy

A typical home backup system has an inverter, batteries (lithium is the most common today) and, optionally, solar panels to recharge them. It must be installed by a qualified installer and signed off with an electrical CoC. Grid-tied solar systems must also be registered with the municipality before they are connected.

  • Size it to what you need. List what must run during an outage - lights, Wi-Fi, TV, fridge - and for how long. Heating appliances such as geysers, stoves, kettles and heaters use far more power than everything else together and are usually left off backup.
  • Portable power stations and small plug-in UPS units can keep a router, laptop or TV going. They are used as supplied, with the devices plugged into them.
  • Generators must run outdoors, well away from doors and windows, because the exhaust is poisonous. Never connect a generator to the house wiring through a plug: it can send power back into the lines and endanger the people working on them. Connecting one to the house needs a proper changeover switch installed by a registered electrician.

Plug-in surge protectors, emergency lights, torches and batteries are light items that HPM couriers anywhere in South Africa.

What you need

These links open the matching products in the HPM online store, with live prices (incl. VAT) and stock.

Questions and answers

Does a surge protector plug really work?

A plug-in surge protector reduces the voltage spikes that reach the appliance plugged into it, which helps against the surges that can follow a power cut. It cannot guarantee protection against every event - a direct or very close lightning strike can overwhelm any plug-in device.

Should I unplug appliances during load-shedding?

It is a good habit for sensitive electronics such as TVs, computers and routers. Switch them off at the wall or unplug them during the outage and switch them back on a few minutes after the power has returned and settled.

Can I install a surge arrester in my DB board myself?

No. Work on the distribution board must be done by a registered electrician, who issues a Certificate of Compliance (CoC) for the work. DIY wiring can void your insurance and is dangerous.

What do I need for a backup power system?

A typical home backup system has an inverter, batteries (lithium is the most common today) and, optionally, solar panels to recharge them. It must be installed by a qualified installer and signed off with an electrical CoC; grid-tied systems also need municipal registration.

Why does my earth leakage trip when the power comes back?

The earth leakage unit trips when electricity leaks to earth - often from a faulty appliance, damp in an outside plug or light, or damaged wiring. Unplug appliances and switch circuits off one at a time to find the cause, and call an electrician if it keeps tripping. Never bypass the earth leakage.

Delivery from HPM

Parcels up to 50 kg are delivered by courier anywhere in South Africa, with the rate shown at checkout. Heavy building materials such as cement, bricks, sand, stone and timber are delivered by our own trucks in the Western Cape, and any order can be collected free in Struisbaai.

WhatsApp 076 370 4367 for a quote, call 028 435 6331 or email [email protected].

General guidance only. Products, sites and building rules differ - always follow the product data sheet and your approved plans, and check with your municipality or a registered professional where the work is structural, electrical or needs approval. More short answers: Building Facts & Advice.