In short
- 18V and 20V are the same class of battery: one label gives the working voltage, the other the peak.
- Amp-hours are running time, not power. Bigger batteries run longer and are heavier.
- Batteries only fit one maker's range, so choose the brand for its whole range, not one tool.
- A drill-driver is the all-rounder, an impact driver is for long screws, a rotary hammer is for concrete.
- Keep batteries out of the heat, do not run them flat, and do not store them empty.
Buying a cordless tool is really buying into a battery. Batteries and chargers only fit one maker's range, so the first drill you buy decides which brand your next five tools will be. This guide explains what the voltage and amp-hour numbers mean, the difference between a drill, an impact driver and a rotary hammer, why brushless costs more, and how to look after the batteries.
18 V or 20 V? It is the same thing
A lithium battery reads higher fresh off the charger than it does while working. Some makers print the working figure and others the peak: DeWalt's own small print says its 20V Max battery has a maximum of 20 volts and a nominal voltage of 18. Makita and Bosch Professional label this class 18V; INGCO, TOTAL and Tork Craft label theirs 20V. A 20V tool is not more powerful than an 18V tool because of the number on the box. The smaller class works the same way: Bosch renamed its 10.8 V tools to 12V and changed nothing else.
Amp-hours: the size of the fuel tank
Ah (amp-hours) is the battery's capacity. On the same voltage, a 5.0 Ah battery holds two and a half times the energy of a 2.0 Ah one. It does not make the tool stronger; it makes it run longer between charges, and it makes the battery bigger, heavier and slower to charge. On Makita's fast charger a 2.0 Ah battery takes about 25 minutes and a 5.0 Ah about 45.
The battery platform: choose the brand first
Each maker has a platform: one battery that fits its whole cordless range. INGCO says a single battery of its 20V platform runs more than 580 of its tools, and Bosch says its 18V batteries fit its professional tools all the way back to 2008. Batteries do not swap between brands. Makita's manual warns that using its batteries on other products, or other batteries on its tools, risks fire and overheating and cancels the warranty.
So before the first purchase, look at the whole range, not just the drill. Does the brand also make the grinder, the saw, the garden tools you will want later? Is the range stocked near you, with spare batteries?
Kit or bare tool? A kit comes with batteries and a charger. A bare tool - listed as "tool only", "unit only" or with no battery - is cheaper and is what you buy once you own that brand's batteries. Check the listing carefully: a bare tool will not work out of the box.
Drill, impact driver or rotary hammer?
| Tool | Takes | For |
|---|---|---|
| Drill-driver with hammer function | Round-shank bits in a 13 mm chuck | The all-rounder: drilling wood and metal, driving screws with a clutch, and light hammer drilling into brick. |
| Impact driver | 1/4 inch hex bits only | Driving long screws and bolts. Far more turning force than a drill, but no chuck and no clutch. |
| Rotary hammer | SDS-Plus bits | Concrete. Hits much harder than a hammer drill, and can chisel. |
The numbers show the gap. A Makita 18V hammer drill is rated for 13 mm holes in masonry and about 60 Nm of torque. Its impact driver delivers 170 Nm. Its rotary hammer drills 20 mm in concrete. If you fix into concrete regularly, a hammer drill is not a substitute for a rotary hammer.
Watch the names. Makita South Africa lists its hammer drills as "impact driver drill". The true impact driver is the one with the hex bit holder.
On a drill-driver, the numbered collar behind the chuck is the clutch. It limits how hard the drill turns a screw, so you do not strip the head or sink it too deep. The drill symbol bypasses the clutch for drilling. The gear switch gives a slow, strong speed for driving and big bits, and a fast one for light drilling.
Brushed or brushless?
A brushed motor uses carbon brushes that wear and are eventually replaced. A brushless motor has none: it runs cooler, is controlled electronically to use the battery more efficiently, and needs less maintenance. Makers claim noticeably longer running time per charge for their brushless models. Brushless tools usually cost more.
Looking after the batteries
- Keep them out of the heat. Do not store batteries where it can reach 50 °C, which includes a closed car or a bakkie canopy in summer. Let a hot battery cool before you charge it.
- Do not run them flat. Stop and charge when you feel the tool losing power.
- Do not store them empty. If a battery will stand for months, charge it first and top it up from time to time. Makers differ on the ideal level: TOTAL suggests about half charge.
- Use the maker's own charger.
- Keep the terminals clear. Do not carry a battery loose with nails, screws or coins, keep it dry, and do not use one that has been dropped or damaged.
- Never burn a battery. It can explode. Hand old ones in for recycling.
Lithium batteries have no memory effect, so there is no need to drain them before charging. A battery that runs for a much shorter time after a full charge is worn out and needs replacing.
Wear ear protection when hammer drilling, use the side handle, take the battery out before you change a bit, and check for cables and pipes before drilling into a wall. Choosing the bit is covered in which drill bit for which material.
Products for this job
In stock at HPM now, with today's prices (incl. VAT). Tap a product for details, delivery and to add it to your cart.
Cordless drills and drivers
Batteries and chargers
More cordless tools
Rotary hammers
What you need
These links open the matching products in the HPM online store, with live prices (incl. VAT) and stock.
- Cordless tools - Makita, Bosch, INGCO, TOTAL and Tork Craft
- Tools and power tools
- Batteries and chargers - match the brand and voltage of your tools
- Impact drivers
- Rotary hammers - SDS-Plus, for concrete
- Drill and driver bits
Questions and answers
Is a 20V cordless drill more powerful than an 18V one?
No. They are the same class of battery labelled two ways. 20 volts is the maximum voltage fresh off the charger and 18 volts is the nominal working voltage. Compare the torque and speed on the specification sheets instead.
What does Ah mean on a cordless tool battery?
Amp-hours: the battery's capacity. On the same voltage a 5.0 Ah battery stores two and a half times the energy of a 2.0 Ah battery, so the tool runs longer per charge. It does not make the tool more powerful, and the battery is heavier and takes longer to charge.
Can I use one brand's battery in another brand's tool?
As a rule, no. Each maker's batteries fit that maker's range only. Makita's manual warns that using its batteries with other products risks fire and overheating and voids the warranty. Choose a brand for its whole range before you buy your first tool.
What is the difference between a hammer drill and an impact driver?
A hammer drill has a chuck for drill bits, a clutch for driving screws and a hammer mode for light drilling into brick. An impact driver takes only hex bits and delivers far more turning force, for driving long screws and bolts. For regular drilling into concrete you need a rotary hammer with SDS-Plus bits.
Is a brushless drill worth the extra money?
A brushless motor runs cooler, is controlled electronically to use the battery more efficiently and has no carbon brushes to wear out, so it runs longer per charge and needs less maintenance. A brushed tool does the same work and usually costs less, and its brushes are replaced when they wear.
Related guides
Delivery from HPM
Parcels up to 50 kg are delivered by courier anywhere in South Africa, with the rate shown at checkout. Heavy building materials such as cement, bricks, sand, stone and timber are delivered by our own trucks in the Western Cape, and any order can be collected free in Struisbaai.
WhatsApp 076 370 4367 for a quote, call 028 435 6331 or email [email protected].
Sources
The facts in this guide were checked against:
- DHP485ZJ Cordless Impact Driver Drill - product page and specifications - Makita Power Tools SA
- Cordless Hammer Driver Drill DHP485 - Instruction Manual - Makita Corporation
- Changeover from 10.8V to 12V - Bosch Professional
- INGCO P20S cordless platform - INGCO
- TOTAL 20V Cordless Tools - P20S Lithium Ion Battery Platform - TOTAL
- DTD153ZJ Cordless Impact Driver - product page - Makita Power Tools SA
General guidance only. Products, sites and building rules differ - always follow the product data sheet and your approved plans, and check with your municipality or a registered professional where the work is structural, electrical or needs approval. More short answers: Building Facts & Advice.