In short
- Salt and UV break paint down faster at the coast, so expect to repaint more often than inland.
- For walls, use a quality exterior acrylic made for harsh conditions - it lets moisture escape and copes with sun and rain.
- The primer does half the work: plaster primer on new plaster, a rust-inhibiting primer on steel, a galvanised iron primer on new galvanising.
- Wash salt off before you paint and once or twice a year afterwards.
- Most paint failures come from poor preparation or painting over damp, not from the top coat.
Paint on a house near the sea has a short, hard life. The same tin that lasts for years in a sheltered inland suburb can chalk, fade and peel much sooner on a wall that faces the surf. You cannot change the weather, but you can choose a paint system that suits it and put it on properly. This guide covers what to buy for walls, metal and timber, and the preparation that decides how long the job lasts.
What the coast does to paint
- Salt settles on every surface. It holds moisture against the paint, speeds up rust on any steel underneath and, if it is painted over, stops the new coat from bonding.
- UV breaks down the binder in paint. The surface turns chalky and colours fade.
- Wind-driven rain finds every hairline crack, and the water behind the paint film then pushes it off as blisters and flakes.
- Sand carried by the wind slowly scours exposed faces.
Because UV and salt break paint down faster, expect to repaint more often than inland. Good products and good preparation stretch the interval; nothing removes it.
Paint for plastered walls
Use a quality exterior acrylic (water-based) paint for walls. Acrylic paint stays slightly flexible, copes with sun and rain and lets moisture in the wall escape as vapour instead of trapping it. Within the acrylics, the things to look for on the tin are:
- Made for exterior use and, ideally, described by the maker as suitable for harsh or coastal conditions.
- The grade. Most brands offer a premium, a mid-range and a budget exterior paint. Premium paints contain more and better binder and pigment, so they cover better and hold up longer. At the coast, where the labour of repainting comes round sooner, the cheapest tin is rarely the cheapest job.
- Texture. Fine-textured and elastomeric (high-build, flexible) coatings can bridge hairline cracks and hide uneven plaster. Smooth paints show more of the surface but collect less dirt.
HPM stocks paint from Dulux, Plascon and Duram, among others. Compare the product data sheets for the recommended surfaces, the number of coats and the spreading rate.
Primers and undercoats
The primer is what holds the system to the wall. Match it to the surface:
- New plaster: let it cure and dry out first - often around four weeks in good weather - then use an alkali-resistant plaster primer. Fresh plaster is alkaline and can attack paint applied too early.
- Chalky or powdery old paint: wash and brush it down, then use a penetrating masonry primer or bonding liquid, as the paint maker recommends, to bind the surface.
- Sound old paint in good condition: usually needs only washing and a light sand before the new top coats.
- Walls that have had damp: fix the cause first, let the wall dry, then use a damp-sealing primer if the maker's system calls for it. See damp-proofing basics.
Metal, roofs and timber
Steel and iron
Gates, burglar bars, balustrades and steel window frames rust from the first scratch. Remove loose rust, treat what remains with a rust converter, apply a rust-inhibiting metal primer and finish with an enamel or a direct-to-metal paint. Pay attention to welds, edges and the bottoms of posts, where rust starts.
Galvanised steel and roof sheeting
Ordinary paint does not stick well to new galvanising. Clean it with a galvanised iron cleaner and prime it with a galvanised iron primer before painting. Roofs are finished with a roof paint made for sheeting or tiles; fix any leaks first, as described in coastal roof waterproofing.
Timber
For timber, use a suitable exterior varnish, sealer or enamel. Clear finishes show the grain but give the wood less protection from UV than pigmented ones, so they need recoating sooner, particularly on doors and frames that face the afternoon sun. Recoat when the finish starts to look dry, before it cracks and the wood underneath goes grey.
Preparation, step by step
Most paint failures come from poor preparation. For a repaint:
- Wash. Scrub or pressure-wash the walls with fresh water to remove salt, dust and chalk. Treat mould and algae with a fungicidal wash. Let everything dry.
- Scrape and sand all loose, blistered and flaking paint back to a firm edge.
- Repair. Fill hairline cracks with a flexible exterior crack filler. Wider cracks, cracks that keep growing and diagonal cracks from the corners of windows and doors may point to structural movement and should be checked by a professional first.
- Seal gaps around window and door frames with a paintable exterior sealant.
- Prime bare and repaired areas with the correct primer.
- Paint two full top coats, or as many as the tin specifies, without thinning more than the maker allows.
Pick the day as well. Avoid painting in strong wind, in direct midday sun on a hot wall, or late in the afternoon when dew or sea mist will settle on wet paint. Wash walls down once or twice a year afterwards to remove salt.
Colour and sheen
Dark and very bright colours absorb more heat and show fading and salt marks sooner than light, earthy colours. White and pale shades stay cooler and age more gracefully, which is one reason they are so common in coastal towns. On sheen: a matt or low-sheen finish hides uneven plaster, while a sheen finish sheds dirt and washes more easily. Many estates and some coastal towns have rules about exterior colours, so check before you order.
How much paint to buy
Measure each wall (length x height), subtract large doors and windows and add the areas together. Every tin states a spreading rate in square metres per litre. Divide your wall area by that rate and multiply by the number of coats. Rough or textured plaster and the first coat on a porous surface use more paint than the figure on the tin, so allow extra. Buying one larger batch rather than several small tins also avoids slight colour differences between batches.
What you need
These links open the matching products in the HPM online store, with live prices (incl. VAT) and stock.
- Paint - exterior and interior paint, primers, varnish and painting tools
- Plaster primers - for new or bare plaster
- Metal primers and rust treatment - including galvanised iron primer
- Crack fillers - fill and seal cracks before painting
- Damp sealers - for walls that have had a damp problem fixed
- Exterior varnish - for doors, window frames and garden timber
- Rollers and trays
- Paint brushes
- Dulux - paint brand stocked by HPM
- Plascon - paint brand stocked by HPM
- Duram - paint, primers and waterproofing stocked by HPM
Questions and answers
Which paint should I use outside?
Use a quality exterior acrylic (water-based) paint for walls; it lets moisture escape and copes with sun and rain. For timber, use a suitable exterior varnish, sealer or enamel, and for metal use a rust-inhibiting primer first. Prepare surfaces properly - most paint failures come from poor preparation.
How often should exterior paint be redone near the sea?
Expect to repaint more often than inland because UV and salt break paint down faster. Wash walls down once or twice a year to remove salt, repair cracks before they let water in, and use a good-quality exterior paint made for harsh coastal conditions.
How long should new plaster dry before painting?
New plaster needs time to cure and dry out - often around four weeks in good weather. Paint too early and the alkaline plaster can cause the paint to fail. Prime with an alkali-resistant plaster primer before applying the top coats.
Can I paint over damp or flaking paint?
No. Find and fix the cause of the damp first and let the wall dry. Scrape off all loose and flaking paint, fill cracks, prime bare and powdery areas, and only then apply the top coats. Painting over damp alone will not solve it.
Does HPM deliver paint nationwide?
Yes. Paint is a courier item: parcels up to 50 kg are delivered by The Courier Guy anywhere in South Africa, with the rate shown live at checkout. You can also collect free from the store in Struisbaai.
Related guides
Delivery from HPM
Parcels up to 50 kg are delivered by courier anywhere in South Africa, with the rate shown at checkout. Heavy building materials such as cement, bricks, sand, stone and timber are delivered by our own trucks in the Western Cape, and any order can be collected free in Struisbaai.
WhatsApp 076 370 4367 for a quote, call 028 435 6331 or email [email protected].
General guidance only. Products, sites and building rules differ - always follow the product data sheet and your approved plans, and check with your municipality or a registered professional where the work is structural, electrical or needs approval. More short answers: Building Facts & Advice.